Homeowners plan to DIY the great paver installation. But, they jump into this major project without doing the required research to get the job done correctly. This results in trying to finish off the task as soon as possible, this doesn’t lead to several mistakes but, also, ground for heavier expenses shortly.
If you are planning to DIY pave installation lately, don’t stress! We are here to take the hard out of the hardscaping system for your convenience and ease. We have curated the top mistakes that people make while installing pavers, in the hope that once you know them, you won’t repeat them.
Filling backfill or base with dirt
When the backfilling is done using only dirt, you will get an uneven and bumpy surface. In addition, the pavers are likely to sink, rotate, and separate shortly.
Pavers are as sturdy as the surface they sit on. Thus, you need to ensure laying pavers on a gravel base on top of that dirt-filled base.
Digging a shallow base
Next, comes the digging part. It might seem like a lot of hard work to you. Indeed, it is. The deeper you dig as the base for the paver installation, the better it is.If you end up thinking gravel base alone to protect that paver for years to come, you are mistaken. It is only a cheap solution.The general rule is 4 inches for common foot traffic surfaces and 6 to 10 inches for driveways or parking lots.
The base is not compact enough
An uneven and raised base will leave you with bumpy and uneven pavers. Hence, before settling in for bedding sand or pavers, you first need to ensure that the base is compact enough.The general rule is the base needs to be firm, compact, and flat. In addition, it should raise more than 1/8 inches.
To give it the right form, use a steel temper or a plate compactor. Use any of this equipment in both the direction, until you get the right thickness for the base.
Mistakes while installing bedding sand
Improper bedding sand installation is visible in the results as voids and dips. Bedding sand is the layer above your gravel base. It intends to cover the gravels and stones with sand, to level up the space. In addition, it covers up any mistakes that occur at the gravel base. Thus, you need to ensure doing bedding sand installation in the right way.
Read More:
